Working with plastic (PVC) piping

Before using plastic pipes, you should check you local plumbing codes to insure that you are using correct type of plastic pipe: usually ABS or PVC for drain lines and CPVC for supply lines. Do not connect ABS plastic to PVC pipe.

Cut the pipes with a fine toothed saw and remove all burrs. Assemble plastic pipe carefully. Dry-fit several pieces ahead of time before gluing. Make alignment marks where you make a turn. Once they are glued, you cannot take the pieces apart.

Once you have dry-fit the pieces and your alignment marks. Work quickly for each joint because the cement sets rapidly. Check the codes to see which primer and cement you should use. Clean the ends of the pipe and fitting and coat with primer. Apply the cement to the outside bend of the pipe and the inside of the fitting socket.

Push the two pieces together; making sure the pipe goes into the socket all the way. Twist it a quarter turn as you push to help spread the cement evenly. Complete the twist until your alignment marks come together. Hold the pipe and fitting together for about 20 seconds while they fuse. Lastly, wipe away any excess cement with a cloth.

Master Faucet Products Installation Guide